Difference between revisions of "Clad"

From Wurmpedia
Jump to navigation Jump to search
(Page created)
 
 
(23 intermediate revisions by 7 users not shown)
Line 1: Line 1:
[[CDB | Main]] / [[:Category:Skills | Skills]] / '''{{PAGENAME}}'''
+
[[CDB|Main]] / [[:Category:Structures|Structures]] / [[:Category:Walls|Walls]] / '''{{PAGENAME}}'''
 
   
 
   
 
==Description==
 
==Description==
 
Clad is the terminology given to the process of applying materials to an existing reinforced mine wall. This is used in a decorative or aesthetic purpose, and has no further [[Support beam|reinforcement]] effect on the tile it is applied to.
 
Clad is the terminology given to the process of applying materials to an existing reinforced mine wall. This is used in a decorative or aesthetic purpose, and has no further [[Support beam|reinforcement]] effect on the tile it is applied to.
 +
Requires at least 30 masonry to perform the action.
  
Paving is the skill needed to pave dirt, e.g. for creating [[road]]s, paving, laying the floor of your [[House (general)|house]], or simply for aesthetic pleasure.
+
==Clad Options==
 
 
It is possible to pave under water; for example to ease the exiting of a [[ship]] onto dry land, and again for aesthetic purposes.  With [[Body strength]] higher than 21 you are able to pave a tile then dig it into water to completely submerge it.
 
 
 
==Items required==
 
  
 
{| border=1 class=wikitable
 
{| border=1 class=wikitable
! width=200 |Pavement Type !! width=200|Material Used !! width=200|Image
+
! width=200 |Wall Type !! width=200|Material Used !! width=200|Image
|-
 
|| [[Cobblestone]] || [[Stone brick]] || [[Image:Cobblestone.png|200px|link=Cobblestone]]
 
|-
 
|| [[Gravel]] || [[Rock shards]] || [[Image:Gravel3.png|200px|link=Gravel]]
 
|-
 
|| [[Marble bricks]] || [[Marble brick]] || [[Image:Marble_bricks.png|200px|link=Marble_bricks]]
 
|-
 
|| [[Marble slabs]] || [[Marble slab]] || [[Image:Marble_Slabs.png|200px|link=Marble_slabs]]
 
 
|-
 
|-
|| [[Pottery bricks]] || [[Pottery brick]] || [[Image:Pottery_bricks.png|200px|link=Pottery_bricks]]
+
|| Stone brick || [[Stone brick]] x10 <br> [[Mortar]] x10 || [[Image:Stone brick reinforced cave wall.jpg|200px]]
 
|-
 
|-
|| [[Rough cobblestone]] || [[Colossus brick]] || [[Image:Rough_cobblestone.png|200px|link=Rough_cobblestone]]
+
|| Marble brick || [[Marble brick]] x10 <br> [[Mortar]] x10|| [[Image:Marble brick reinforced cave wall.jpg|200px]]
 
|-
 
|-
|| [[Round cobblestone]] || [[Rounded stone]] || [[Image:Round_cobblestone.png|200px|link=Round_cobblestone]]
+
|| Pottery brick || [[Pottery brick]] x10 <br> [[Mortar]] x10|| [[Image:Pottery brick reinforced cave wall.jpg|200px]]
 
|-
 
|-
|| [[Sandstone bricks]] || [[Sandstone brick]] || [[Image:Sandstone_bricks.png|200px|link=Sandstone_bricks]]
+
|| Round stone brick || [[Rounded stone]] x10 <br> [[Mortar]] x10|| [[Image:Rounded stone brick reinforced cave wall.jpg|200px]]
 
|-
 
|-
|| [[Sandstone slabs]] || [[Sandstone slab]] || [[Image:Stone_Slab_floor.png|200px|link=Sandstone_slabs]]
+
|| Sandstone brick || [[Sandstone brick]] x10 <br> [[Mortar]] x10|| [[Image:Sandstone brick reinforced cave wall.jpg|200px]]
 
|-
 
|-
|| [[Slate bricks]] || [[Slate brick]] || [[Image:Slate_bricks.png|200px|link=Slate_bricks]]
+
|| Slate brick || [[Slate brick]] x10 <br> [[Mortar]] x10|| [[Image:Slate brick reinforced cave wall.jpg|200px]]
 
|-
 
|-
|| [[Slate slabs]] || [[Slate slab]] || [[Image:Slate_slabs.png|200px|link=Slate_slabs]]
+
|| Wood clad || [[Plank]] x10 <br> [[Large nails]] x1|| [[Image:Wood clad reinforced cave wall.jpg|200px]]
 
|-
 
|-
|| [[Stone slabs]] || [[Slab]] || [[Image:Stone slabs.png|200px|link=Stone_slabs]]
+
|| Rendered brick || Stone brick reinforced wall + [[Clay]] (10kg) || [[Image:Rendered brick reinforced cave wall.jpg|200px]]
|-
 
|| [[Wooden planks]] || [[Floor boards]] || [[Image:Floor_board.png|200px|link=Floor_board]]
 
 
|}
 
|}
  
 
==Method==
 
==Method==
Packing dirt is the first paving action required to add any type of pavement.  Paving is then added to this [[packed dirt]], except for floor boards, which may be laid on [[dirt]] or [[marsh]].  Activate the item you want to pave with then right-click the tile and choose '''Pave'''.
+
To clad a mine wall, one must first reinforce it with a [[support beams|support beam]].
  
Higher paving skill and higher quality paving items give a faster completion timer.
+
Activate a [[trowel]] (for brick cladding), or a [[hammer]] or [[mallet]] (for wooden cladding), right-click the reinforced wall, then click the desired '''Clad''' option. Then, use the same tool to continue cladding with the materials listed.
  
===Removing paving===
+
To create a rendered brick reinforced wall, first clad with [[stone brick|stone bricks]] and [[mortar]] to create a stone brick reinforced wall, then [[combine]] [[clay]] into a single unit at least 10kg large. Activate the clay, right-click the wall, and click '''Render wall'''. 10kg of clay will be consumed and the wall will become rendered.
Paved tiles may be cultivated back to dirt by equipping a [[shovel]] and choosing '[[Destroy pavement]]'.  [[Body strength]] of 20 and a [[digging]] skill of 10 is required for destroying pavement. Destroying pavement gives digging skill and the length of time it takes to remove the pavement is also based on this digging.
+
===Removing clad===
 +
Clad must be removed with the use of a [[crowbar]]. After clad removal, the tile will remain reinforced and unprepared as it was prior to its cladding.
  
===Diagonal paving===
+
==See also==
Selecting "Pave nearest corner" will pave half of the tile diagonally depending on the paving type being laid.
+
* [[Masonry]]
  
===Subterranean paving===
 
Paving underground(in mines) can be done by first reinforcing the mine floor. After the tile is supported, you can apply mortar to the reinforcement. Once the tile is prepared, you're able to perform normal above-ground paving methods(all above options are available underground as well).
 
  
It should be noted that paving diagonally is not possible whilst underground.
 
 
===Bridge paving===
 
Paving the surface of a completed bridge can be done similarly to subterranean paving. After the bridge is completed, you must apply mortar to the bridge's surface. After the roadway is prepared, you can then apply the paving type of your choosing.
 
 
== House floors ==
 
Paving is also used to build house [[floor plan|floor plans]]. The minimum skill requirements are:
 
 
{| class="wikitable"
 
! Skill || Floor
 
|-
 
| 21 || [[Stone brick floor]], [[Stone slab floor]], [[Sandstone slab floor]]
 
|-
 
| 25 || [[Pottery brick floor]]
 
|-
 
| 30 || [[Slate slab floor]]
 
|-
 
| 40 || [[Marble slab floor]]
 
|}
 
 
In addition, a certain level of paving is required to build these kinds of floor at a given height. The skill required is the same as listed on the table for [[Multi-story housing]] for the same floors... so 70 skill for 8th floor etc.
 
 
==See also==
 
*[[Road]]
 
  
== [[Titles]] ==
 
* Roadbuilder at 50 skill
 
* Road Engineer at 70 skill
 
* Road Warrior at 90 skill
 
  
[[Category:Skills]]
+
[[Category:Babel/C]]
[[Category:Babel/P]]
 

Latest revision as of 22:20, 17 August 2020

Main / Structures / Walls / Clad

Description

Clad is the terminology given to the process of applying materials to an existing reinforced mine wall. This is used in a decorative or aesthetic purpose, and has no further reinforcement effect on the tile it is applied to. Requires at least 30 masonry to perform the action.

Clad Options

Wall Type Material Used Image
Stone brick Stone brick x10
Mortar x10
Stone brick reinforced cave wall.jpg
Marble brick Marble brick x10
Mortar x10
Marble brick reinforced cave wall.jpg
Pottery brick Pottery brick x10
Mortar x10
Pottery brick reinforced cave wall.jpg
Round stone brick Rounded stone x10
Mortar x10
Rounded stone brick reinforced cave wall.jpg
Sandstone brick Sandstone brick x10
Mortar x10
Sandstone brick reinforced cave wall.jpg
Slate brick Slate brick x10
Mortar x10
Slate brick reinforced cave wall.jpg
Wood clad Plank x10
Large nails x1
Wood clad reinforced cave wall.jpg
Rendered brick Stone brick reinforced wall + Clay (10kg) Rendered brick reinforced cave wall.jpg

Method

To clad a mine wall, one must first reinforce it with a support beam.

Activate a trowel (for brick cladding), or a hammer or mallet (for wooden cladding), right-click the reinforced wall, then click the desired Clad option. Then, use the same tool to continue cladding with the materials listed.

To create a rendered brick reinforced wall, first clad with stone bricks and mortar to create a stone brick reinforced wall, then combine clay into a single unit at least 10kg large. Activate the clay, right-click the wall, and click Render wall. 10kg of clay will be consumed and the wall will become rendered.

Removing clad

Clad must be removed with the use of a crowbar. After clad removal, the tile will remain reinforced and unprepared as it was prior to its cladding.

See also