Guides:Build house

Note: This article is the opinion or suggestion of one or more players. Information in player-made guides are not maintained by the Wurmpedia staff. It is subject to player opinions, and information may not be factually accurate or up-to-date. For updated game mechanics information, check the main namespace articles.

Introduction

One of the first questions asked in the kingdom chat is "How can I build a house?". The answer is quite long, so this guide has been set up to help new players. This guide should provide the information you need to construct your first house. If you are new, before you decide to build you may want to make sure you have properly planned your location, in order to avoid unneeded frustration.

To construct your house, you will need:

• A flat area of ground.
• A mallet or an hammer (higher quality = faster build)
• 20 planks for each wall you build.
• 1 large nail for each wall you build.

This house would now be considered finished and would be secure, but it does not have a floor and roof. To make these (from wood as it is easiest) you will need:

• The mallet or hammer you made the walls with.
• 4 small nails for the roof and floor. (two small nails each)
• 10 planks for the floor.
• 10 wood shingles for the roof (they are made from planks, an extra 3 planks will be plenty.)

The largest house you can build is determined by how much carpentry skill you have. To find the amount of skill you need to build a certain house add the total number of floor tiles and the total number of walls. This formula is a useful one to use:

(total number of floor tiles) + (total number of wall sections) = carpentry skill required

So for a 2x2 house you would need:

(4 floor tiles) + (8 wall sections) = carpentry skill of 12

Symmetrical doughnut house formula where x is the the number of tiles that make up one side of the doughnut hole:

(12 * x) + 12

Helpful tools can be found in the External Tools section towards the bottom of this page.

If you are in a village, you may be able to persuade someone with high carpentry skill to plan your house and add you to permissions.

Finding a location

When you think you are ready to make your first house, the first thing you are going to need is a suitable place to do so. Bear in mind that you will want some basic resources nearby such as water, trees, and exposed rock for making a mine tunnel.

Now that you have wandered around a little, if you believe you have found "The Spot" take a moment to check your local chat for other people. If no one is around, try to check around at least 30 tiles in every direction for existing houses and settlements. If you do find some sign of a settlement, it is considered proper etiquette to contact the owner before beginning construction. While the established player does not own anything outside their deeded area, building on someone's doorstep is considered very rude. Normally, an established player will ask you to not build close, and may guide you to a location that is just as nice or better nearby. A good relationship with your neighbours improves everyone's experience in Wurm and helps avoid misunderstandings.

For towns, however, it is considered to be rude to build with 50 to 100 tiles of the town if you do not have the permission of said town. Doing so can cause conflict and even hostility from a large group of players. It is always best to seek permission, and if declined, do not worry, there are more places to settle.

Note: You cannot build a house inside the perimeter of a settlement you are not a member of. Although you can build a fence, it is considered very rude to do so without the consent of the settlement owner. Examining the ground tiles before you even start cutting down trees and leveling the ground will prevent further disappointment on your side and bad relations with your neighbours. It will say "This is within the perimeter of Settlement X" in the event window.

Flattening the ground

After you find a suitable location you normally need to prepare the area. Before you plan your house the ground needs to be completely flat. In order to flatten the ground, "activate" your shovel by double clicking on it, then right click on the ground where you want the house. Choose the flatten option. Note that flattening affects the eight tiles around the tile you flatten. If you do not have enough skill to flatten the exact spot you can dig dirt from nearby and drop it on the tiles to bring it closer to level. See also digging.

Woodcutting

For the planks and mallet, you'll need to get some lumber. Activate your hatchet and go to the nearest tree. It's a good idea to right click the tree and examine it before you decide to chop it down, as only very old or overaged trees will provide a good amount of lumber. When you have found a tree that you are happy with, simply right-click it while your hatchet is activated and choose "cut down". You will need to do this multiple times before the tree is felled. Once it does fall you will see a felled tree on the ground (or just a log if the weight of the tree was below or exactly 24kg). Next you will need to chop up your felled tree in smaller pieces and create logs. Right-click on the felled tree while you have your hatchet activated and select chop up. Now pick up the log and we will go on to planks and creating the mallet.

Creating planks

Creating planks is just as simple as any other action in Wurm, which is lucky since you will need a lot of planks to build your house: 20 for each wall. To make planks you activate your saw (starting to see the logic yet?) and right click on your log, choose Create > Construction materials > Plank. Repeat the log cutting and plank-making to create the amount of planks you need for the amount of walls you have.

Creating the mallet

Equip your carving knife, right-click the log in your inventory and select Create > Construction materials > Shaft. Do this twice. Then right click one of the shafts in your inventory and select Create > Tool parts > Mallet Head. Equip the mallet head and right-click the shaft, and select Create > Tools > Mallet. If all succeeded, you now have a mallet.

Iron

Next up is iron, this is the hardest part.

To find iron, activate your pickaxe, right click on a tile that says rock and choose Mining > Prospect. Iron is the most commonly occurring ore in Wurm, but it can be a challenge to find. You may have to search through a lot of rock tiles before you manage to find an iron mine - but prospecting can help narrow down your search.

If you are unlucky with finding an iron vein you can also rummage many rock tiles and collect the iron rocks which weigh 3kg and give 0.2kg of iron when melted. This is not much but may be enough to make the nails needed for building the house. This method is very useful for those without a public mine to use, or those who do not want to start a mine. You can easily get enough iron for your entire house, but it will be low quality nails. This way can also be a lot faster if you only need a low amount of iron and have many rock tiles around but no premade mine or luck with prospecting any iron.

Prospecting for iron

When you prospect a rock tile it show all ore veins within a 7x7 area. You can use this to approximate the location of the ever elusive iron vein. Once you get the message there is iron nearby, you can start to tunnel for it. The first rock tile will break after mining it approximately 60 times, all further tiles inside the cave take around 50. After you are two tiles in, you can start mining at different angles (up, forward, or down). Only the last action will decide which angle the mined tile will be, so once you receive the message 'the wall will break soon' start mining up, mining down or mining forward. There are many methods of building a cave, one of the most thorough method is to make your main shaft about 10 tiles long, then mine side shafts every other tile going in both directions.

When you have found your precious iron vein, it's time to start mining it to get to the ore. The mine option is also found in the mine sub-menu. Each mining action will deliver 20kg ore. You'll want to get to the iron inside the rock of these ores so you will have to smelt them. You do this by getting yourself another of those fancy logs and with your hatchet "create" a kindling from it. Once you have this little nifty piece of wood, you select your steel and flint, right click on the kindling and create a campfire with it (its under the container sub-menu). Now that you have your campfire, it's time to get smelting! Right-click on your campfire and "open" it, drag the ore from your inventory to the campfire's inventory. Next there's waiting - lots of it. MAKE SURE TO FEED THE FIRE WITH WOOD, OTHERWISE THE FLAMES WILL GO OUT AND YOU WILL HAVE TO START THE SMELTING PROCESS OVER FROM SCRATCH! I suggest you mine more ore while you do this but of course if you want to idle you can do that, too. Right-click on the ore and examine it to check how hot it is. Once it reaches glowing hot, you are very close to get your iron lump. When the ore has smelted, it is replaced by a 1kg iron lump in the campfire. You will need at least 3-4kg for the next steps.

Small anvil

The small anvil is a crucial tool in Wurm. Get your two 1.0kg iron lumps from the campfire (they have to be glowing hot for this to work). Activate one of them, right-click on the other, and choose combine. Activate the mallet you made earlier and right click on the 2kg iron lump, choose create and pick small anvil. If you are lucky you will pull this off at the first try, so just repeat until you have your anvil.

Nails

Nails! This is what you need to keep your house together. Pick up a iron lump of at least 0.3kg and activate it, right-click on your anvil and Create > Construction materials > Large nails. When you succeed with this you will get a handful of large nails, you'll need one of these handfuls per wall of your house. You'll also need 2 small nails for the floor and one small nails for the roof.

Door lock

You need one door lock per door to keep your house secure. While stealing is illegal on PVE servers, humanoid monsters (and unwanted player visitors) can enter an unlocked door. Activate at least 1kg of iron lump and right-click on your small anvil. Select Create > Locks > Doorlock. As your skill is low, this may take a few tries.

Planning the house

For every tile your house will occupy, you'll need 1 carpentry skill. Also, for every wall you'll have you'll need 1 carpentry skill. So if you want to build a 1x1 house (the smallest house possible), you'll need 5 carpentry (4 walls, and 1 tile). To plan the house, go to your flattened piece of land, activate your mallet and right-click a tile, and select Plan building. You can plan additional (adjacent) tiles in the same way; selecting Plan building on a planned tile will remove it from the plan. When you're satisfied with your building shape, right click on it and select Finalize building.

Building the house

Finally we can start to actually build the house. Activate your mallet and make sure you have at least one handful of large nails and a plank in your inventory, right-click on a side of your house and select Build > Wooden door/Wooden wall/Wooden window (remember that you need a door to be able to enter the house). Repeat this on all the walls.

Next you will have to pick up more planks and continue to build, 19 more times on every wall to be exact since they all need 20 planks total.

The majority of the work is now over. You now need to add a roof and a floor to your house. Right-click the ground with your mallet activated and click "plan floor," then right-click the ground again and click "plan roof." Then right-click each plan with your mallet activated and plan a type of floor and roof. A Wooden plank floor is probably easiest along with a Wood shingle roof. You'll need 3 small nails and about 15 planks (some of which will need to be carved into wood shingles to complete both the floor and the roof.

Inner walls

Inner walls can only be planned once all the exterior walls of a house are complete. To plan inner walls activate a mallet or trowel, right-click a tile border inside the house and select Plan > Wall. On the wall plan select a wall type and continue as explained above.

Multi-story housing

Your house is now complete with a roof, floor and finished walls. It's probably quite simple; but when you're a more skilled player you could make something much better and fancier, with more than one floor! See multi-story housing for more information.

Repairing your house

Your house walls may become damaged in time by decay, or can be damaged by someone trying to break into your house (except on Freedom servers). To see the damage on one of your walls, right click the wall and select examine. This will display quality and damage of the wall.

To repair your house walls, activate a plank, right-click your house wall, and select repair.

Improving your house

The higher the quality of your walls, the slower they decay, and the harder it is to break them for an attacker. To see the quality of one of your walls, right click the wall and select examine. This will display quality and damage of the wall.

Tip: To improve your house walls, activate a plank, right-click your house wall, and select Improve. Success and amount of improvement depends on your carpentry skill.

Managing your permissions and Securing your Home

Permissions are used to control who has access to your home or building, to lock or unlock all doors with a door lock on them, to change the name of the building, or to destroy the whole structure. Just right-click your body in the character menu and select Manage > Buildings. Here, you can add players to a list to grant them different permissions for your building. To allow access, type their name into the add players to list section. Click the add button, and they will appear on the list of manageable permissions.

No player can pick up items from a finished house without being added on the permissions of the building. Any player can get inside a finished house (but not pick anything up) unless relevant doors are locked with a door lock.

Stone houses

It's possible to build a house made of stone following the guide above (premium players only), however the material requirements are different :

• Skill requirement : 30 Masonry.
• Trowel for building the stone walls.
• 20 x stone brick for each segment of wall.
• 20 x mortar for each segment of wall.
• 10 x stone brick + 10 x mortar for each floor segment (if you're doing a stone brick floor)

Basically once you have planned the layout of your structure you activate the trowel and start building the walls. It is even possible to mix stone and wooden walls in the same house (based on which tool you start the wall with).

Cave dwellings

It is possible to build houses in caves. You can build any type of wall underground, however you cannot build roofs in cave dwellings.

In order to do this you would need to activate a hammer, mallet, or trowel and right-click a flat reinforced cave floor tile. The houses can only be built touching a cave wall if and when all the tiles are on deed and they do not have an adjacent perimeter tile. If any of the adjacent tiles are perimeter tiles the perimeter tile must be mined out. Alternatively, houses in caves cannot be built touching a cave wall if they are off deed. If you attempt to plan a house that is outside the previously stated parameters you will get the following message: You cannot build here, there must be a gap around the building.

External Tools

• Web-based Calculator by Toni
• DeedPlanner by Warlander A 3d deed and house planner