Clad
Main / Structures / Walls / Clad
Contents
Description
Clad is the terminology given to the process of applying materials to an existing reinforced mine wall. This is used in a decorative or aesthetic purpose, and has no further reinforcement effect on the tile it is applied to.
Clad Options
| Pavement Type | Material Used | Image |
|---|---|---|
| Stone brick | Stone brick x10 Mortar x10 |
|
| Marble brick | Marble brick x10 Mortar x10 |
|
| Pottery brick | Pottery brick x10 Mortar x10 |
|
| Round cobblestone | Rounded stone x10 Mortar x10 |
|
| Sandstone brick | Sandstone brick x10 Mortar x10 |
|
| Slate brick | Slate brick x10 Mortar x10 |
|
| Wooden planks | plank x10 small nails x2 |
|
Method
To clad a mine wall, one must first reinforce it with a support beam. After this is done, the supported rock must be prepared with 10 * mortar and 10 * bricks. Only then, will the wall be capable of being clad. Choose your clad type and apply it with the corresponding applicator. Trowels are used for any masonry type, and a hammer will apply planks.
Removing clad
Clad must be removed with the use of a crowbar. After clad removal, the tile will remain reinforced and unprepared as it was prior to its cladding.
