Clad
Main / Structures / Walls / Clad
Description
Clad is the terminology given to the process of applying materials to an existing reinforced mine wall. This is used in a decorative or aesthetic purpose, and has no further reinforcement effect on the tile it is applied to.
Clad Options
| Wall Type | Material Used | Image |
|---|---|---|
| Stone brick | Stone brick x10 Mortar x10 |
|
| Marble brick | Marble brick x10 Mortar x10 |
|
| Pottery brick | Pottery brick x10 Mortar x10 |
|
| Round stone brick | Rounded stone x10 Mortar x10 |
|
| Sandstone brick | Sandstone brick x10 Mortar x10 |
|
| Slate brick | Slate brick x10 Mortar x10 |
|
| Wood clad | Plank x10 Large nails x1 |
|
| Rendered brick | Stone brick reinforced wall + Clay (10kg) | 
|
Method
To clad a mine wall, one must first reinforce it with a support beam.
Activate a trowel (for brick cladding), or a hammer or mallet (for wooden cladding), right-click the reinforced wall, then click the desired Clad option. Then, use the same tool to continue cladding with the materials listed.
To create a rendered brick reinforced wall, first clad with stone bricks and mortar to create a stone brick reinforced wall, then combine clay into a single unit at least 10kg large. Activate the clay, right-click the wall, and click Render wall. 10kg of clay will be consumed and the wall will become rendered.
Removing clad
Clad must be removed with the use of a crowbar. After clad removal, the tile will remain reinforced and unprepared as it was prior to its cladding.
