Spiral staircase

Main / Structures / Floors / Spiral staircase

Spiral staircase

Creation
Activate Hammer or Mallet Right-click planned staircase Open menu > Plan > Build Clockwise/Counter clockwise Spiral staircase
Total materials
20x Plank 20x Stone brick 20x Mortar 2x Small nails 1x Large nails
Result
Clockwise spiral staircase or Counter clockwise Spiral staircase
Skill and improvement
Uses Carpentry skill
Notes
Uses plank to repair or improve.

It is a normal counter clockwise spiral staircase made of wood.

Usage

Used to move between floors in a building.

Creation

Skill Requirements

Follows the same requirements for multi-story housing:

• 21 Carpentry required to plan, start, and build a staircase on the first floor.
• See multi-story housing for specific skill requirements for higher floors.

Planning

You must right-click on a finished Floor or staircase with a hammer, mallet, or trowel and select Plan > Build clockwise/counter clockwise spiral staircase.

• Be careful when creating one against a wall, as planning a wall on the floor above will be more difficult.
• You can plan on top of other stairs. Note: building spirals in opposite directions on top of each other will not be accessible.
• Can be rotated upon completion.

Materials to start

• 1x large nails
• 1x small nails
• 1x plank
• 1x stone brick
• 1x mortar

Continuing

One of each remaining material is required for each continue action.

See Also

• Floor opening
• Spiral staircase with banisters
• Marble slab staircase
• Stone slab staircase
• Stone brick staircase
• Slate slab staircase
• Pottery brick staircase
• Wooden plank staircase
• Standalone staircase